Common Plumbing Problems You Shouldn’t Fix Yourself

best plumber in Denver

Just because a plumbing issue is common and frequent, it doesn’t mean that it can be fixed easily. The biggest issue, however, is that homeowners think they can tackle them as a DIY project or cut corners by hiring a cheaper but less experienced plumber. As we will see, there are cases when that doesn’t work at all well.

Problems That Are Difficult to See

A good plumber will not just handle standard issues and leaks. They will often be able to find issues that are harder to spot, such as a barely cracked pipe that could be damaged further under pressure. So they can help you avoid long term issues and expensive repairs in the future.

These types of plumbing problems are frequent, but many times homeowners don’t even know about them. They simply have a plumber over to fix a leak, and then 2-3 months later another leak appears around the same area. They could have spent half the amount they did by simply hiring an experienced plumber who can spot issues like the second one early enough.

Problematic Repairs That Seem Easy to Fix

Inexperienced homeowners and plumbers might be able to spot a problem that requires a difficult fix, but they might not have the expertise or the tools to handle it properly. Rather than waste a lot of time and energy on trying to get to the bottom of it yourself, it’s better to just hire the best plumber in Denver.

Some examples of the most common difficult repairs you may encounter could include, running toilets, sump pump failures, slow and clogged drains, or low water pressure. The sources associated with these issues could be very simple to address, but they can also be very complex. The biggest problem is you won’t know what it really is until a professional plumber has a look.

Foreseeing Long Term Issues That Aren’t Obvious

An inexperienced plumber might install new plumbing in your basement that can be easily damaged over time if the basement floods. Or they could fail to see how the geometry of the pipes might cause clogging over time, or become affected by the wear and tear of the material.

A reliable and experienced plumber in Denver will not make such mistakes. They have worked on enough systems to know how to approach an installation from the start and make sure those issues won’t come up. As a result, you’ll pay less over time and enjoy better quality plumbing as well.

Working on Underground Plumbing

Digging out underground water and sewage pipes on your property is no easy feat, and you’ll need a highly skilled plumber with experience on how to avoid damaging other underground utility lines and pipes while they work on your damaged system. Lots of possible concerns can come up, and they can become costly if they’re not dealt with properly from the start.

Professional plumbers will know how to address the issue and who to call for help. They’ll be able to ensure that underground utilities and tree roots are not damaged, that the right place will be excavated in no time at all, and that your piping will be fixed without much difficulty or effort.


What Does HVAC Mean?

The acronym HVAC stands for “heating, ventilation and air conditioning” and it is used to denote any equipment used for heating and cooling residential and commercial buildings as well as for exchanging air within a space or between indoor spaces and the outdoor environment in order to maintain the freshness of interior air. HVAC systems are everywhere these days, from small apartments and large family homes to food service facilities and from public buildings, stores, shops and factories to office buildings. Here are some things to know about HVAC systems in general.

How Do HVAC Systems Work?

HVAC systems can vary widely in terms of size and complexity, but they all serve the purpose of ensuring thermal stability and air quality in buildings and they all rely on the same major components for operation:

  • The heating system – this part of a HVAC appliance consists of a heat generating component, usually a furnace or a boiler attached to a pipe or duct system that circulates the agent that carries the heat throughout the building;
  • The cooling system – this part works by sucking in the warm air from the room, removing the heat from it, then blowing the cool air back into the room. The heat is usually dissipated outside the building;
  • The ventilation component – this subsystem is responsible for purifying air and for maintaining air humidity at healthy levels. It can rely on natural processes or it can use a forced system.

HVAC systems do not necessarily comprise all three components – you can have a heating system without a cooling or ventilation component or you can have a separate air conditioner that is not linked to your heating. While many heating systems are comprised of elements that are all installed indoors, the systems that have a cooling and a ventilation component, too, usually have units that need to be installed outdoors.

HVAC Littleton

How to Choose Your HVAC System

HVAC Littleton technicians substantiate that when choosing your HVAC, the first thing to make up your mind about is the roles that you want your system to fulfil, in other words, you will need to decide whether you need only heating, only cooling or both. In the next phase, you will need to assess and measure your spaces to determine the size and the capacity of the equipment to be installed. Bear in mind that capacity calculations can be complicated and an undersized system will not be able to deliver the expected performance, so the best way to ensure that your calculations are correct is to turn to specialized HVAC company for help and advice. Looking for a good and reliable HVAC Littleton technician in this early phase is the best way to go because you will need a HVAC company to design and to install your system anyway. The next important thing to make up your mind about is the type of fuel that you want to use – while most air conditioners work with electricity, heating systems can use a variety of fuels, including electricity, gas, wood, coal and pellets.


What Companies and Professions Will Require Workers to Follow Fall Protection Training Courses?

If you’re planning to work as a construction worker or to go and work in a factory, then you might want to consider an OSHA course for fall protection training. While the risk of falling and injuring yourself might not be as great as some would have you believe, a risk is still there. As a result, many companies will actually require their workers to follow these training courses and get a valid, OSHA-approved certification given by a fall protection training center.

Now, before considering a fall protection class, it’s important to point out that a lot of professions require OSHA health and safety training – through a class like OSHA 10 or OSHA 30. However, not all  of them need fall protection training. Healthcare is a good example, as it’s important for a healthcare worker to learn about fire hazards and working with various chemicals, but they are not likely to be in danger of falling from a tall building.

fall protection competent person training

On the other hand, there are professions and companies that are closely associated with these risks and with the requirement of having their workers follow some sort of fall protection training course:

  1. The roofing industry typically requires all of its workers to have at least some fall protection training. This is true even of beginning roofing technicians who don’t have much experience, and are basically fresh out of school. So, if you own a roofing company or you’re a roofing contractor constantly outsourcing roofing work to various companies and technicians, it’s very important to make sure that all your workers have the appropriate fall protection competent person training requirements met, before they climb up on a client’s roof.
  2. Any company that handles construction also has a need for workers who have completed a fall protection training course. As a construction worker, you will constantly have to work at significant heights, and the risks are pretty high. Many construction workers use a harness even when working at somewhat lower heights, and they need to know how to operate it properly and how to keep up with the latest fall protection training standards.
  3. Fall protection is also necessary when you’re working in production. Consider the fact that many factories have multiple levels and are constructed without taking all variables into account. Production buildings and warehouses might be built with some safety in place, but they generally imply that workers need to have been trained using OSHA-approved training courses. That way, they can navigate these buildings appropriately, use the right safety tips to avoid dangerous areas, and use the appropriate measures and equipment, for instance, when retrieving items from a tall shelf.

These industries and jobs are all high risk, and they will require workers to take some risks that most people wouldn’t really be willing to take. However, the rewards are also worth mentioning.

Becoming a skilled roofer or construction worker will carry with itself a good reputation and some excellent paychecks. So, in the long run, it’s worth considering the fact that reliable fall protection training will not only protect you from injury, but also help you make a lot of money.

Should all Businesses use Professional Disinfecting Services?

The epidemic of the new coronavirus has changed the world. It made us aware that pathogenic microorganisms exist everywhere around us. People have started to think better about sanitizing and sterilizing the spaces and surfaces where they carry out daily activities and are starting to turn more and more to companies that offer professional disinfection services.

There will always be a risk of infection due to bacteria and viruses but fortunately there are effective solutions to kill these germs.

Up until recently, buildings and surface decontamination was done with the help of spraying substances that were not always effective. Nowadays, there are better methods that guarantee the efficient and safe neutralization of different areas. One of these methods is called nebulization. It is performed with the help of a device that emits a gas (cold fog) that manages to sterilize the air and surfaces.

The main advantage of this revolutionary method is the ability of the gas to propagate slowly, to spread and to reach less accessible places. It does not settle quickly, but persists in the air, thus contributing to the efficient neutralization of germs.

For smaller rooms, where the nebulizer cannot be placed, a mobile device is used instead, which works on the same principle – ULV (Ultra Low Volume). In addition to this method, the objects in the rooms will be disinfected by hand, using special substances. The application of all these substances will be done in an efficient and professional way, by a carefully prepared team of operators.

Covid decontamination services

Turning to a professional Covid decontamination services company is the best solution for any type of client, and businesses should certainly hire such services on a regular basis. The results are fast, and the efficiency is proven in a short time.

A disinfection company has all the knowledge and equipment to achieve efficient sanitation. Therefore, you can count on professional services for a complete disinfection, ensuring a healthy and safe environment for your employees and customers. Professional Covid decontamination service providers have a portfolio of companies and public institutions that have used their services and offer consultancy (operators will travel to the place to be sterilized, in order to assess the situation and measure the level of germs that exist in the air and on surfaces).

The general stages of a disinfection intervention are:

  • Preparing and cleaning the space to be disinfected
  • Measuring the level of germs with the luminometer
  • Disinfection of rooms using the nebulization technique
  • Measurement of germ levels after disinfection
  • Preparation of the sanitation certificate

Operators have thorough training both operationally (in operating devices and preparing substances) and biologically, having a solid knowledge of microorganisms and how they multiply. They strictly follow the rules for the use of protective equipment and biocides. The substances have the necessary approvals, respecting all the norms in force regarding safety – for humans and the environment alike!

The protection and health of employees and customers must be a priority, therefore all businesses should use professional Covid decontamination services on a regular basis, so that the work environment is free from the risk of contact with diseases caused by viruses and bacteria.


How Can I Prevent Having to Repair My Sewer?

HVAC Denver

Certainly, each of us has faced the problem of a clogged sewer at least once. Whether we are talking about sanitary ware in the bathroom or in the kitchen, the pipes become clogged due to food debris or household waste that is incorrectly disposed through the drainage holes. Here’s what you need to know about repairing your sewer, the best solution for unclogging it and how to prevent this.

How to unclog your sewer

Cleaning your drainage pipes can involve simple or complex operations. Some of them can be done with the help of professional cleaning solutions found on the market, as well as with cleaning solutions prepared at home, from simple ingredients. There are also special tools for cleaning sewer pipes, such as special wires or pumps, but it is recommended that they be used only by people who know how to do this operation properly. Severe problems with the sewer require the intervention of HVAC Denver plumbing specialists.

However, it is always best to prevent than fix, and the good news is that there are many ways to prevent clogging of your sewer and avoid dealing with a very serious situation that requires various and complex interventions. It is important to understand what you can do and teach your whole family to do the same.

  1. The most convenient solution is to stop throwing food scraps, dirt, crumbs, grease or hair in the sink. Moreover, we recommend that you avoid throwing oil, fats, dirt in the toilet or bathtub. You can wipe the plate, after eating; using a paper towel that you can then throw in the trash. The oil can be recycled and we recommend that you do so, but if you do not have this option, at least put the used oil in a separate container before throwing it in the trash.
  2. Turn on the hot water tap for a minute on a weekly base. You do not have to use any additional product. Regular drain cleaning using hot water is one of the most recommended and simple prevention solutions. Thanks to this method, you will not allow debris to accumulate in the drainage pipes, because boiled water makes its way through greasy residue build ups, disintegrating them.
  3. Use several tools that prevent food debris from entering the drainpipes:
  • Sieve for the sink. It is a small but simple accessory that will prevent food scraps and crumbs from clogging the drain pipe. It must be simply places on the drain siphon and cleaned anytime it catches some debris.
  • Drain filter. This device is in the form of a drain valve and is very helpful because it filters food waste. It is especially beneficial in cases where there is far too small debris that cannot be retained by a regular sieve. It is ideal for bathroom drains, when there is hair residue.
  1. Do not throw hair in the toilet either. Just because the drainage hole seems big enough doesn’t make it suitable for hair disposal. Actually, whatever you do, try not to mistake your sewer for the trash bin!

What Brands of Plumbing Are the Most Durable?

Plumbing systems vary in terms of complexity, but they are all composed of two subsystems: one that uses pressure and brings in fresh water to use through your faucets and a drainage system that removes the used water from your premises. When you operate your faucets, water comes into your building and it passes through a water meter that measures the amount of water that you consume in your building. The water coming in is cold, so your system needs to feature some sort of solution for heating the water, such as a water heater with a thermostat. Your plumbing system also needs a solution for draining the used water – the drainage can be connected either to a sewer or to a septic system.

To have a plumbing system that works well and that you can rely on for a long time, you need the system to be suitably designed and to use the best products that you can afford. Plumbing system components are available from an extremely wide range of Denver plumbing retailers and manufacturers, so instead of naming brands, here are some features to look for when putting together your system.

Denver plumbers

Choosing the Best Pipes

There are two parameters to consider when choosing your plumbing pipes: the diameter and the material. While the diameter is a matter of system design and it is calculated based on the water needs of your building, the material is a matter of budget. The most common materials include the following:

  • Stainless steel – the most expensive solution works best in areas prone to corrosion;
  • PEX pipes – these affordable pipes are flexible, they come in many sizes and work great for residential applications and small businesses;
  • Copper – the traditional material is used for making highly durable and resistant pipes for hot and cold water alike;
  • PVC pipes – another affordable, modern, synthetic material used in residential applications.

Choosing the Best Faucet

The usability and the design of your faucets will determine the quality of your entire plumbing system. The best faucets for your building are the ones that feature the right size for your sinks, the right designs to match your settings and ceramic valves for durability and drip-free operation. You can choose single-handled faucets for more comfort and more precise adjustments of temperature and output or classic, double-handled designs and you also have the choice between faucets equipped with sprayers or without accessories.

Choosing the Best Water Heater

The most important feature of a water heater is its capacity, so before you start shopping for the best product, contact experienced Denver plumbers to calculate the ideal size of the heater for you – an undersized heater will not be able to provide you the right output and will render your home an uncomfortable place. Your plumber will be able to help you choose the best brand and product by explaining you everything you need to know about the fuel types used by heaters as well as about aspects related to overall costs, durability and energy efficiency.

Preventing the Need for Furnace Repair – Essential Tips to Remember

Preventative Maintenance Annual Furnace Repair

Furnace repair can be costly, and it is usually a big hassle, especially if it happens around wintertime, when you’d want such problems to be happening far away from your home. Unfortunately, it’s usually the case that furnaces break when we need them the most, since that’s usually when they are overused.


The good news is that your furnace breaking down doesn’t necessarily have to happen. You can work together with your HVAC furnace repair Denver CO experts to coordinate and use preventive maintenance and well-timed inspections to get to the bottom of even the smallest issue you can find.


Regular Maintenance to the Rescue


Preventing a malfunction from happening can be challenging, but it is possible. In most cases, what happens is that a maintenance requirement (or more than one) of the furnace is ignored, and you end up having to repair it or replace a broken part. If someone were to check up on your furnace and discover the issue before it leads to something breaking, then you can have it resolved with minimal effort and time, and you won’t have to spend so much money on having your HVAC and/or furnace repaired.


The first step is to check the most important maintenance tasks off your list. Look up tasks that homeowners can generally do, such as checking the vents for mold or looking up how to measure the fuel or power consumption of the furnace, and then comparing it with the ideal consumption rate for that model.


The next step is to hire a professional furnace repair service to check up on your unit at least once a year – preferably a few weeks before the coming of winter. That way, you’ll have plenty of time to have your furnace repaired if a hidden issue is found, or to make sure that all the maintenance activities that were neglected can be taken care of as soon as possible.


Finding the Right Experts for the Job


When it comes to finding a dependable furnace repair service, you might have a lot of options. However, you also have a significant number of ways to narrow them down and make sure you hire only the best technicians in your area:


  1. First of all, make sure you look for a service that operates locally. You’ll save time and money, and you’ll be able to talk to local experts who know a lot about the types of furnaces that are used in your area – most likely, including yours.
  2. Ask them about their license, warranty and insurance, and make sure to look them up using the BBB’s online tools. Also, check up on some reviews written about the company by their past clients, to see if they are generally considered to be reliable.
  3. Talk to them, and inquire about their routine maintenance and inspection activities. Make sure they operate within your budget, and that they can also offer repair and emergency services, in case your furnace breaks down when you need it more.


With these simple checklist, you can locate and hire one of the best services in your area, and they will be able to help you with your furnace. Their assistance with preventive maintenance might help you save thousands of dollars down the line.

Why Would I Need 4k HDMI Cable?

Why Use A 4k HDMI Cable

4k is becoming the new standard in the way that we experience movies and gaming. Depending on what type of content that one enjoys, the right cable can make a difference in the video and audio quality. There are many types of HDMI cables, each new version improving over the last. There is the usual standard HDMI cable, available in most homes and there are also HDMI cables with a dedicated network channel to make an internet connection available without needing any additional cables.


Video resolutions of 720p and 1080p are still being used, especially in gaming monitors. The current trending resolution that most PC’s seem to handle fairly good is 1440p. But as PC hardware advances at a rapid pace, 4K displays are slowly starting to become more sought-after. The same goes for consoles. Most TV sets today come with 4K support and console manufacturers are putting a lot of emphasis on making sure that their systems can handle a large number of pixels. The Xbox One X, for example, was marketed with the promise of delivering 4K gaming. The images looked incredible but a major downside was the reduced frame rate.


Besides the decent hardware capabilities of consoles and personal computers, there also needs to be a good conduit between the device and the display, one that can reliably deliver all of the necessary data. When it comes to 4K, the standard HDMI cable is no longer an option. They are tested to make sure that they reliably transmit 720 and 1080p video resolutions. Going above these resolutions will require more bandwidth, an amount that the standard version is not capable of.


What 4K requires is a high-speed 4k HDMI cable. These are higher quality cables which are more rigorously tested to make sure that they can transmit resolutions from 1080p to 4K while maintaining a rich color palette. The first-ever HDMI to support 4K resolution was version 1.4. This was a huge step for HDMI technology as it also added Ethernet connectivity and 3D capability. It was version 2.0 that managed to deliver 4K resolution of up to 60 fps and had a bandwidth of 18 Gbps.


When searching for a cable that supports the high bandwidth required by 4K, one should look an HDMI cable certified as high speed. This should not be hard as most cables are labeled according to their specifications. A high-speed HDMI cable can comfortably run on version 2.0 HDMI and should be capable of transmitting 4K resolutions at 60 fps. The frames, however, will depend on the device. As said before, 4k will demand a lot of juice from both PCs and consoles. A high price does not equal a good cable and when searching for the right cable, make sure to look for reliable manufacturers. This does not mean that throwing a few bucks at a cable will deliver optimal performance. Pricing is still a good way to navigate around the endless options out there.




Getting Rid of Expensive Energy Bills: How Solar Panels Can Save You Money

Figuring out how solar panels can save you money is not rocket science. After all, aside from being extremely good for the environment compared to other energy sources, solar energy is basically a free energy generation method, meaning you don’t need to create an energy exchange to get electricity, since there’s one already at hand – the sun bombarding the earth with solar rays.

But how is it that you can save money with solar power, when the installation itself can cost well over $10,000? Surprisingly, you’ll find you can get that whole amount back quite easily and gain the benefit of having a sustainable energy source for decades to come.

Save Money with Solar

One of the greatest things about solar panels is that they generate their own electricity without you having to buy any kinds of supplies or fuels that would cost additional money. In that respect, a solar array is much better than a backup generator, and modern day solar arrays even have highly efficient battery-based energy storage systems that can store power when you don’t use it and provide it even at night, when there is no sun.

Depending on the size of the solar installation you own and the amount of sun exposure it gets every day, you can be looking at thousands of dollars saved per year. In some cases, you can even get all your energy from solar power, so you no longer have to pay your electric bill at all.

Sun Exposure

While imagining how solar panels can save you money, it’s also clear that the amount of sun exposure you have in your area will play an important role. Depending on where you live, the sun will be out for a longer period of time on average each year. So, if you plan to move to a new area and install a solar panel array, make sure you check the average number of sunny days and precipitation days in that region.

Places like California, Arizona and Florida get the most amount of sunlight per year, while living somewhere in the north or where the weather can be unpredictable might not be the best option for installing solar panels.

solar panel incentives

Tax Benefits

The government loves it when people use solar energy. As a result, there are a lot of tax incentives involved that you can benefit from as soon as you decide to have your first solar array installed. Check on the cost of solar panels in Denver to see the savings benefits obtained.

A good example is the residential tax credit, which allows taxpayers to claim about 30% of the installation costs for solar array installations. That percentage will decrease to 26% by 2020, and is expected to decrease even more as the years go by. Additional tax benefits also apply depending on the region in which you live.

Give Back to the Grid

When it comes to saving money with solar installations, you can go one step further than you could with any other energy generation method. With solar arrays, the power generation process is continuous, meaning you get free electricity converted from the energy given by the sun on a regular basis.

If you go away for a while and don’t use that energy, what happens is that it feeds back into the grid, and the electric company will actually pay you for the extra energy you offer. So that is a potential source of money that you can tap into just by owning a solar panel array.

Geothermal Unit Installations: Useful Insight from Denver Heating and Cooling Contractors

Installing your preferred heating system with the help of a Denver contractor can be more difficult than you expect. Since geothermal systems are much newer than most others, there aren’t as many experts who know all about their cost, installation and specific maintenance requirements. However, the efficiency and low long term cost of a geothermal heating pump is a definite asset.

So let’s take a closer look at what Denver HVAC contractors can tell you about these systems and how you should go about getting one for your own home.


An Overview of Geothermal Energy and Heat Pumps

The term “geothermal energy” literally means heat energy taken from the Earth, and this is precisely what it is. Hot lava and steam vents from beneath the earth can provide a constant source of heat that our technology can exploit on a practical basis.

With the temperature remaining constant underground all year round, contractors organize the installation of pipes that are buried more than four feet deep into the earth. By pumping a special liquid through the pipes they create what is called a “heat exchanger,” effectively transferring the heat from underground into your home. Working in reverse, geothermal heat pumps can also help keep your home cool in the summer by pumping heat from the air into the earth.

The greatest advantage of a geothermal system is that it uses very little energy to help heat your home – only as much as is required to keep the pump working. Since the actual heat comes from the earth instead of from heated or burnt materials such as methane gas, you neither need fuel nor the energy to burn it.

Although the complexity of these systems will definitely require the presence of an experienced and professional team of technicians, new tax incentives initiated in 2009 make their installation far more convenient than in the past. So if you are looking for the newest and best technology to ask Denver heating and cooling contractors to install on your residential property, geothermal is the way to go.


Installing Your Own Geothermal Heating System

Right now geothermal technology is still in its beginning stages, but great progress has been made to simplify the installation process and allow for more affordable installation costs. Unfortunately, a geothermal heat pump is still far from becoming a simple DIY project.

Fortunately, the installation itself is not too complicated. A full evaluation of your home’s integrity and structure is required, and a home energy audit is also needed. Moreover, contractors will have to get informed about the precise location of any underground pipes that might run under your property before they begin work on digging.

While insulation and sealing protocol has to be observed, geothermal heat pumps can easily be integrated into your existing system of vents and pipes. Traditional forced air and radiant floor heating system can also be adapted through the use of the appropriate type of water-to-water or water-to-air heat pumps.

Once the process is completed, you can sit back and relax while your new geothermal system provides you with all the heating requirements you have for your home at a minimal long term expenditure.